利用低摩阻柱塞抽油泵提高泵效及防偏磨技术的应用

doi:10.7623/syxb200704030

石油学报 ›› 2007, Vol. 28 ›› Issue (4): 138-141.DOI: 10.7623/syxb200704030

利用低摩阻柱塞抽油泵提高泵效及防偏磨技术的应用

韩修廷¹, 王德喜², 王研³, 周录方¹, 王秀玲¹

1. 大庆油田有限责任公司技术发展部黑龙江大庆163453;
2. 大庆油田有限责任公司采油六厂黑龙江大庆163114;
3. 大庆油田有限责任公司采油一厂黑龙江大庆163114

收稿日期:2006-07-21 修回日期:2006-10-23 出版日期:2007-07-25 发布日期:2010-05-21
作者简介:韩修廷,男,1957年2月生,1982年毕业于华东石油学院采油工程专业,现为大庆油田有限责任公司技术发展部主任工程师,教授级高级工程师,研究方向为采油工程及机械采油.E-mail:hanxiut@petrochina.com.cn
基金资助:
黑龙江省重点科技攻关项目(GB03A502)资助

Low-friction sucker rod pump applied to improvement of pump efficiency and application of anti-eccentric wearing technology in beam pumping well

Han Xiuting¹, Wang Dexi², Wang Yan³, Zhou Lufang¹, Wang Xiuling¹

1. Department of Technical Development, Petro China Daqing Oilfield Company Ltd., Daqing 163712, China;
2. No.6 Oil Production Plant, Petro China Daqing Oilfield Company Ltd., Daqing 163114, China;
3. No.1 Oil Production Plant, Petro China Daqing Oilfield Company Ltd., Daqing 163114, China

Received:2006-07-21 Revised:2006-10-23 Online:2007-07-25 Published:2010-05-21

摘要/Abstract

摘要： 大庆油田杆管偏磨井数逐年增多,严重影响了聚合物驱采油效果和规模应用。对杆柱屈曲的原因、规律和偏磨状态以及偏磨机理进行了分析,研制并应用聚合物驱低摩阻柱塞泵解决了摩阻小、漏失量也小的难题。实施了防偏磨配套技术,研制了3种杆串在线测试仪,解决了杆管偏磨的问题,延长了杆管工作寿命,提高了泵效。

关键词: 低摩阻柱塞抽油泵, 杆柱屈曲, 抽油机井, 注聚合物驱油, 抽油杆管偏磨, 防偏磨技术

Abstract: The rod failure rate is increasing year by year in beam pumping wells in polymer flooding area of Daqing Oilfield,which limited the application of polymer flooding.The principle of rod buckling and the eccentric wearing status of rod were analyzed.A novel low-friction sucker rod pump with low leakage and low friction was presented and applied in polymer flooding area.The anti-eccentric wearing techniques were introduced and applied in polymer flooding area of Daqing Oilfield.Three kinds of online tester for rod string were developed.The operating lives of beam pumping systems were prolonged effectively,and the pump efficiency was improved as well.

Key words: low-friction sucker rod pump, rod buckling, pumping well, polymer flooding, eccentric wearing of rod anti-eccentric wearing technology

中图分类号:

TE833

韩修廷, 王德喜, 王研, 周录方, 王秀玲. 利用低摩阻柱塞抽油泵提高泵效及防偏磨技术的应用[J]. 石油学报, 2007, 28(4): 138-141.

Han Xiuting, Wang Dexi, Wang Yan, Zhou Lufang, Wang Xiuling. Low-friction sucker rod pump applied to improvement of pump efficiency and application of anti-eccentric wearing technology in beam pumping well[J]. Editorial office of ACTA PETROLEI SINICA, 2007, 28(4): 138-141.

[1]	周斌, 王延江, 刘伟锋, 刘宝弟. 基于Hessian正则化支持向量机的多视角协同识别抽油机井工况方法[J]. 石油学报, 2018, 39(12): 1429-1436.
[2]	王宏博, 董世民, 甘庆明, 辛红, 朱葛. 低产抽油机井动态参数仿真模型与提高系统效率的途径[J]. 石油学报, 2018, 39(11): 1299-1307.
[3]	董世民张喜顺吴长杰郭吉民. 抽油机井区块整体节能参数仿真优化方法[J]. 石油学报, 2010, 31(3): 475-479.
[4]	姚春东. 提高抽油机井系统效率的计算机仿真分析[J]. 石油学报, 2005, 26(4): 106-110114.
[5]	董世民. 水驱抽油机井杆管偏磨原因的力学分析[J]. 石油学报, 2003, 24(4): 108-112.
[6]	崔旭明, 何富君, 罗敏, 张永弘, 黄兆芝. 抽油机井油管载荷及应力应变分析[J]. 石油学报, 2003, 24(1): 108-112.
[7]	杨海鹏, 董范, 王树义, 张素琴. ABC分类管理在油田开发中的研究与应用[J]. 石油学报, 2000, 21(3): 51-56.
[8]	魏兆胜, 郑俊德, 陈涛平, 陈家琅. 定向井有杆泵抽油井筒压力分布预测新方法[J]. 石油学报, 1996, 17(3): 131-136.

利用低摩阻柱塞抽油泵提高泵效及防偏磨技术的应用

Low-friction sucker rod pump applied to improvement of pump efficiency and application of anti-eccentric wearing technology in beam pumping well

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics

本文评价