充满液体的圆筒中受压屈曲杆柱旋转实验

doi:10.7623/syxb201803010

石油学报 ›› 2018, Vol. 39 ›› Issue (3): 341-348.DOI: 10.7623/syxb201803010

充满液体的圆筒中受压屈曲杆柱旋转实验

王长进^1,2, 李子丰¹, 李银朋^1,2, 戚珉¹, 王磊¹

1. 燕山大学石油工程研究所河北秦皇岛 066004;
2. 东北石油大学秦皇岛分校河北秦皇岛 066004

收稿日期:2017-05-23 修回日期:2018-01-05 出版日期:2018-03-25 发布日期:2018-04-10
通讯作者: 李子丰,男,1962年7月生,1983年获大庆石油学院学士学位,1992年获石油大学(北京)博士学位,现为燕山大学石油工程研究所教授、博士生导师,主要从事油气井杆管柱力学的研究。Email:zfli@ysu.edu.cn
作者简介:王长进,男,1979年4月生,2004年获西南石油学院学士学位,2007年获燕山大学工学硕士学位,现为燕山大学博士研究生、东北石油大学秦皇岛分校副教授,主要从事油气井杆管柱力学的研究。Email:40857774@qq.com
基金资助:
国家自然科学基金项目（No.51374183，No.51674220，No.51490653）资助。

Experiment on the rotation of compressional buckling column in the liquid-filled cylinder

Wang Changjin^1,2, Li Zifeng¹, Li Yinpeng^1,2, Qi Min¹, Wang Lei¹

1. Petroleum Engineering Institute, Yanshan University, Hebei Qinhuangdao 066004, China;
2. Qinhuangdao Branch School, Northeast Petroleum University, Hebei Qinhuangdao 066004, China

Received:2017-05-23 Revised:2018-01-05 Online:2018-03-25 Published:2018-04-10

摘要/Abstract

摘要：

在钻井过程中，下部钻柱的主要运动形式为受压屈曲后的自转和涡动。受压屈曲钻柱旋转可以增大钻柱与井壁的接触摩擦力，诱发钻柱横向振动和涡动，造成井壁失稳和钻柱损坏，甚至造成钻井作业失败。目前，井筒中受压屈曲旋转钻柱的运动规律的认识尚不全面甚至部分认识是错误的。通过实验研究了载荷、转速、钻井液和圆筒内径等参数对圆筒中的受压屈曲杆柱旋转运动的影响。分析了模拟钻柱在液体中由正向涡动转为自转和反向涡动的耗散能量。结果表明：①随着载荷的增大，屈曲钻柱首先正向涡动；其次既有正向涡动，又有自转；然后沿部分井壁反向涡动和自转的组合；最后沿井壁反向涡动。②钻井液的动力润滑作用可以减小钻柱正向涡动旋转幅值，并能阻止反向涡动的形成。③提高钻井液的动力润滑性、减小井眼直径、增加井斜角，出现反向涡动的载荷增大。④钻柱随载荷增加可能出现2次反向涡动。⑤钻柱运动状态转换符合最小耗散功率原理。

关键词: 钻柱, 旋转, 屈曲, 轴向载荷, 反向涡动

Abstract:

In oil drilling, the main movement of the lower drill string is shown as rotation and whirl after compressional buckling. The rotation of drill stem under compressional buckling can increase the frictional force between drill stem and borehole wall, trigger the transverse vibration and whirl of drilling stem, cause borehole instability and the damage of drill string, and even lead to the drilling failure. At present, the research on the motion laws of rotary drill string in the boerhole under compressional buckling is incomplete and even some understandings are wrong, thus requiring further improvement. In this study, the influences of load, rotational speed, drilling fluid, cylinder inner diameter and other parameters on the rotary movement of compression buckling column in the cylinder were studied by experiments, so as to analyze the dissipated energy of simulated drill string in the liquid from forward whirl to rotation and backward whirl. The results indicate that:(1) With the increase of load, the buckling drill string first shows forward whirl, followed by forward whirl with rotation, then evolves to backward whirl and rotation along a part of well wall, and finally presents backward whirl along boerhole wall. (2) The dynamic lubrication of drilling fluid can reduce the rotation amplitude of the forward whirl of drill string, and the backward whirl can be prevented. (3) Through improving the dynamic lubrication of drilling fluid, increasing the well deviation angle, and decreasing the borehole diameter, the load of backward whirl is increased. (4) Twice backward whirl of drill string may occur with the increase of the load. (5) The motion state transition of drill string conforms to the theory of minimum power dissipation rate.

Key words: drill string, rotation, buckling, axial load, backward whirl

中图分类号:

TE242

王长进, 李子丰, 李银朋, 戚珉, 王磊. 充满液体的圆筒中受压屈曲杆柱旋转实验[J]. 石油学报, 2018, 39(3): 341-348.

Wang Changjin, Li Zifeng, Li Yinpeng, Qi Min, Wang Lei. Experiment on the rotation of compressional buckling column in the liquid-filled cylinder[J]. Acta Petrolei Sinica, 2018, 39(3): 341-348.

参考文献

[1] 李子丰.油气井杆管柱力学及应用[M].北京:石油工业出版社,2008.
LI Zifeng.Tubular mechanics in oil-gas wells and its applications[M].Beijing:Petroleum Industry Press,2008.
[2] 高德利,高宝奎,耿瑞平.钻柱涡动特性分析[J].石油钻采工艺,1996,18(6):9-13.
GAO Deli,GAO Baokui,GENG Ruiping.Analysis of drillstring whirling[J].Oil Drilling & Production Technology,1996,18(6):9-13.
[3] 史玉才,王军,朱江,等.下部钻柱反向涡动机理研究[J].石油钻探技术,2007,35(5):43-45.
SHI Yucai,WANG Jun,ZHU Jiang,et al.Research on backward whirling mechanism of bottom drillstring[J].Petroleum Drilling Techniques,2007,35(5):43-45.
[4] 高宝奎,高德利,谢金稳.钻柱涡动及其应用[J].石油大学学报:自然科学版,1997,21(1):25-27.
GAO Baokui,GAO Deli,XIE Jinwen.Drillstring whirling and its application[J].Journal of China University of Petroleum,China:Edition of Natural Science,1997,21(1):25-27.
[5] 章扬烈,肖载阳,端木纲.旋转钻柱运动原理的研究[J].石油矿场机械,1988,17(2):1-6.
ZHANG Yanglie,XIAO Zaiyang,DUANMU Gang.Research on rotary drill string movement principle[J].Oil Field Equipment,1988,17(2):1-6.
[6] VANDIVER J K,NICHOLSON J W,SHYU R J.Case studies of the bending vibration and whirling motion of drill collars[R].SPE 18652,1990.
[7] 屈展,张绍槐.内含钻井液的钻柱涡动动力特性分析[J].天然气工业,1994,14(1):46-48.
QU Zhan,ZHANG Shaohuai.Analysing dynamic characteristics of drilling string eddy of inside containing drill fluid[J].Natural Gas Industry,1994,14(1):46-48.
[8] 屈展.钻井液流体力引起旋转石油钻柱涡动的理论分析[J].力学与实践,1994,16(3):49-51.
QU Zhan.Theoretical analysis of drilling fluid cause rotary drill string whirl[J].Mechanics in Engineering,1994,16(3):49-51.
[9] 屈展,徐健学.内外钻井液作用下的旋转钻柱涡动分析[J].西安石油学院学报:自然科学版,1997,12(1):27-29.
QU Zhan,XU Jianxue.Whirling analysis of the rotary drill string by the action of drilling fluid inside and outside the drill string[J].Journal of Xi'an Petroleum Institute:Natural Science Edition,1997,12(1):27-29.
[10] 张广清,陈勉,路永明.斜直井段旋转钻柱稳定性试验研究[J].石油钻采工艺,2001,23(1):23-25.
ZHANG Guangqing,CHEN Mian,LU Yongming.Test study on drilling stem stability of rotary drilling in the slant hole[J].Oil Drilling & Production Technology,2001,23(1):23-25.
[11] CHEN S L,BLACKWOOD K,LAMINE E.Field investigation of the effects of stick-slip,lateral,and whirl vibrations on roller cone bit performance[R].SPE 56439,2002.
[12] 管志川,靳彦欣,王以法.直井底部钻柱运动状态的实验研究[J].石油学报,2013,24(6):102-106.
GUAN Zhichuan,JIN Yanxin,WANG Yifa.Experimental research on motion behavior of bottom drill string in straight hole[J].Acta Petrolei Sinica,2013,24(6):102-106.
[13] 管志川,邵冬冬,温欣,等.水平井眼中旋转钻柱运动特性的实验研究[J].工程力学,2013,30(5):340-345.
GUAN Zhichuan,SHAO Dongdong,WEN Xin,et al.Experimental research on motion states of bottom drilling string in horizontal well[J].Engineering Mechanics,2013,30(5):340-345.
[14] 史玉才,王军,管志川.下部钻柱涡动机理及规律的实验研究[J].广西大学学报:自然科学版,2007,32(2):126-129.
SHI Yucai,WANG Jun,GUAN Zhichuan.Research on whirling mechanism of bottom drillstring and its rules by inner simulated experiments[J].Journal of Guangxi University:Natural Science Edition,2007,32(2):126-129.
[15] 狄勤丰,朱卫平,姚建林,等.空气钻井钻具组合动力学特征及井斜机理研究[J].石油学报,2008,29(6):917-921.
DI Qinfeng,ZHU Weiping,YAO Jianlin,et al.Dynamic features of bottom hole assembly and borehole deviation mechanism in air drilling[J].Acta Petrolei Sinica,2008,29(6):917-921.
[16] 狄勤丰,王文昌,姚永汉,等.底部钻具组合动力学模型及涡动特性仿真[J].中国石油大学学报:自然科学版,2010,34(3):53-56.
DI Qinfeng,WANG Wenchang,YAO Yonghan,et al.Dynamics model and whirl features' simulation of bottom hole assembly[J].Journal of China University of Petroleum:Edition of Natural Science,2010,34(3):53-56.
[17] 李茂生,施建国,周国栋,等.基于材料滞后效应的钻具旋转状态分析[J].长江大学学报:自然科学版,2010,7(4):154-156.
LI Maosheng,SHI Jianguo,ZHOU Guodong,et al.Drill tool rotation analysis based on lag effect of material[J].Journal of Yangtze University:Natural Science Edition,2010,7(4):154-156.
[18] 罗敏.管道内旋转细长梁固液耦合动力学分析[D].大庆:大庆石油学院,2009.
LUO Min.Fluid-structure interaction dynamic analysis of rotary slender beam in pipe[D].Daqing:Daqing Petroleum Institute,2009.
[19] 张强,刘巨保,罗敏,等.圆筒内旋转细长管与流体界面耦合的数值方法[J].计算力学学报,2011,28(4):601-606.
ZHANG Qiang,LIU Jubao,LUO Min,et al.Numerical simulation on interface coupling of rotary slender pipe and fluid in cylinder[J].Chinese Journal of Computational Mechanics,2011,28(4):601-606.
[20] 刘巨保,罗敏,王琳,等.管道内旋转细长梁的固液耦合方法研究[J].工程力学,2011,28(4):251-256.
LIU Jubao,LUO Min,WANG Lin,et al.Methodology of fluid-structure interaction of rotary slender beam in pipe[J].Engineering Mechanics,2011,28(4):251-256.
[21] STROUD D R H,LINES L A,MINETT-SMITH D J.Analytical and experimental backward whirl simulations for rotary steerable bottom hole assemblies[R].SPE 140011,2011.
[22] 李子丰.钻柱涡动理论研究的必由之路——钻井液动力润滑学与钻柱动力学相结合[J].石油学报,2013,34(3):607-610.
LI Zifeng.An inevitable way in drill-string whirling research:combination of drilling fluid power lubrication with drill string dynamics[J].Acta Petrolei Sinica,2013,34(3):607-610.
[23] 李子丰.油气井杆管柱力学研究进展与争论[J].石油学报,2016,37(4):531-556.
LI Zifeng.Research advances and debates on tubular mechanics in oil and gas wells[J].Acta Petrolei Sinica, 2016,37(4):531-556.
[24] 李子丰,王长进,田伟超,等.钻柱力学三原理及定性模拟实验[J].石油学报,2017,38(2):227-233.
LI Zifeng,WANG Changjin,TIAN Weichao,et al.Three principles of drill string mechanics and qualitative simulation experiments[J].Acta Petrolei Sinica,2017,38(2):227-233.
[25] 温诗铸,黄平.摩擦学原理[M].4版.北京:清华大学出版社,2012:25-27.
WEN Shizhu,HUANG Ping.Principles of tribology[M].4th ed.Beijing:Tsinghua University Press,2012:25-27.
[26] 肖文生,张扬,钟毅芳.钻柱在钻井液和井壁摩阻共同作用下的涡动[J].中国机械工程,2004,15(4):334-337.
XIAO Wensheng,ZHANG Yang,ZHONG Yifang.Annulus whirling motion analysis of the rotary drill string under the actions of rubs between well-walls and drilling fluids[J].China Mechanical Engineering,2004,15(4):334-337.
[27] 李子丰,王兆运,阳鑫军,等.钻柱涡动分析及防涡稳定器设计[J].石油钻采工艺,2008,30(3):124-127.
LI Zifeng,WANG Zhaoyun,YANG Xinjun,et al.Swirling analysis of drilling strings and anti-whirl stabilizers design[J].Oil Drilling & Production Technology,2008,30(3):124-127.

充满液体的圆筒中受压屈曲杆柱旋转实验

Experiment on the rotation of compressional buckling column in the liquid-filled cylinder

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	狄勤丰, 骆大坤, 周星, 王文昌, 陈锋. 横向主动控斜力作用下底部钻具组合动力学特征[J]. 石油学报, 2023, 44(9): 1552-1561,1573.
[2]	柳军, 杜智刚, 郭晓强, 殷腾, 俞海, 曹大勇. 水平井裸眼分段压裂完井管柱下入屈曲磨损预测模型及规律[J]. 石油学报, 2022, 43(11): 1632-1641.
[3]	黄文君, 张星坤, 高德利, 石小磊, 苏鹏. 复合模式下套管磨损形状与深度计算模型[J]. 石油学报, 2021, 42(10): 1373-1381.
[4]	丁露阳, 杨宁宁, 杨全进, 唐海全, 杨震, 肖文生, 葛鹏, 袁晓琪, 于华伟. 地质导向中的旋转失真与随钻自然伽马成像动态测量算法[J]. 石油学报, 2021, 42(1): 95-104.
[5]	张彦廷, 郑志滨, 陈敬凯, 黄鲁蒙, 张晧, 王志坤, 葛政. 石油钻柱顶部高频激振解卡耦合响应特性[J]. 石油学报, 2020, 41(12): 1697-1705.
[6]	高德利, 王宴滨. 海洋深水钻井力学与控制技术若干研究进展[J]. 石油学报, 2019, 40(S2): 102-115.
[7]	李子丰. 油气井管柱冲击动力问题研究概况和发展趋势[J]. 石油学报, 2019, 40(5): 604-610.
[8]	田家林, 杨应林, 朱志, 刘强, 肖新启, 张金龙, 李居瑞. 基于旋冲螺杆提速器的井下动力特性[J]. 石油学报, 2019, 40(2): 224-231.
[9]	李银朋, 李子丰, 王长进, 戚珉, 任文明. 基于叠加原理的钻柱行星运动诱发平面流场的PIV分析[J]. 石油学报, 2018, 39(12): 1421-1428,1436.
[10]	李子丰, 王长进, 田伟超, 谢健. 钻柱力学三原理及定性模拟实验[J]. 石油学报, 2017, 38(2): 227-233.
[11]	毕刚, 李根生, 屈展, 牛继磊, 黄中伟, 席仲琛, 窦亮彬. 自进式旋转射流钻头破岩效果[J]. 石油学报, 2016, 37(5): 680-687.
[12]	李子丰. 油气井杆管柱力学研究进展与争论[J]. 石油学报, 2016, 37(4): 531-556.
[13]	张彪, 于水, 李红, 郝立华, 刘小龙. 下刚果盆地碳酸盐岩盐筏体沉积规律[J]. 石油学报, 2016, 37(3): 360-370.
[14]	李子丰. 统一强度理论在杆管柱力学中的适用性和具有SD效应材料的安全应力域[J]. 石油学报, 2016, 37(12): 1537-1542.
[15]	洪迪峰, 唐雪平, 苏义脑, 盛利民, 窦修荣. 非连续性旋转导向钻具组合的广义纵横弯曲法[J]. 石油学报, 2014, 35(3): 543-550.